Tag Archives: volvo

Just stop in!

Posted on by

We are your friendly Neighborhood Garage, just stop in.

Too many times I hear this phrase, “I was driving by and you guys looked so busy.” Don’t wait, just stop in. I hear this one too, “I didn’t think you had time to look at it.” Don’t wait, just stop in. We are your friendly neighborhood garage and ready to help. Maintenance ignored leads to a break down on the road. Nobody likes sitting at the side of the road waiting on a tow truck.

Do you have a funky noise? We can look at that. Is it time for service? We do service work on all makes and models. A no start problem is no problem at Tony’s Service Center. Just stop in, we fix broken cars. Car care is a part of owning a car. Car repairs will happen and you need to be ready. Just stop in and say hi.

Need an oil change today?

We use a “synthetic blend” as our standard oil. Servicing you car is the most common reason to visit a repair garage. We use a synthetic blend because it extends the oil life, offering better protection against wear and resists carbon coking. If your car needs full synthetic we stock that too.

Regular motor oil: Regular oil works great for older engines, but if you do not service it regularly and or ignore your service intervals. It can lead to heavy carbon build up “hard sludge” or coking of the internal engine parts. “Coking aka soft sludge” “Coking” is characteristic of a high temperature reactions involving hydrocarbons. On todays small high revving engines, carbon deposits may cause restricted oil flow, shortening the life span of your engine.

Full Synthetic motor oil:  Synthetic oils primary use is in high heat stress applications like Arizona. Jet engines use Synthetic oil. Synthetic oils are great for cold climates too, it will flow normally even in freezing temperatures.  European cars, motor cycles and many of todays small turbo charged engines need full synthetic oils to prevent sludge and carbon build up.

Just stop in and let us know how we can help. 

HeyAnthonyAz.com & TonysServiceCenter.com

 

 

FREE Oil Change Monthly Drawing at Tony’s

Posted on by

~~~~~~~~~~~~~~~ FREE OIL CHANGE @ TONY’S ~~~~~~~~~~~~~~~~~

It’s time to change the oil!

Enter to win! Win a free oil change, enter your information @ Tony’s contact page.

Enter your contact information on Tony’s contact page & in the message box type “Free oil change monthly drawing” and include the make, model and year of your car.

You will be automatically entered into the drawing for the next months free oil change drawing. Enter as often as you like. The winner of the free oil change will be contacted by Tony’s at the end of each drawing month. The free oil change offer will be running till December 2015

The oil change includes, up to 5 qt’s of 10w30 synthetic blend oil, an oil filter, and under hood fluid top off’s, plus a vehicle safety inspection. This is a $30.00 value at our regular price & a great saving if you win it for free. So enter today, it’s easy and free.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

HeyAnthonyAZ.com 2014 ~ It’s all good under the hood…

K & N Air Filters = A Dirty “MAF”

Posted on by

If you have seen any type of auto racing, than you may have seen the K & N air filter stickers on some of the race cars.

K & N air filters work great for high performance motor sports, water craft and off-road vehicles, but they are not good to use on a regular engine. Many engines today use a “MAF” sensor (Mass Air Flow Sensor) to measure incoming air going into the engine. The engine computer uses the data from the MAF sensor to adjust engine timing, fuel injection, and transmission shift points.

K & N air filters may improve engine output only by a small percentage. The way K & N does this, is by using a less restrictive woven mesh. The woven mesh is coated with a light spray of oil. The oil is used to help trap dirt in the mesh. When an engine is running, it is drawing air past the oil coated mesh. Then the oily air flows past the MAF sensor, coating the sensor in a fine oil. The fine oil attracts dirt and contaminates the MAF sensor element, just like the sensor in the video above.

Only OE quality filters should be used with a MAF systems. A quality filter will prevent the sensor from getting all clogged up with dirt. The video shows me cleaning a GM MAF sensor gently with a Q-tip dipped in alcohol. The client thought they needed a tune up. The  car was running poorly and pinging, but the computer had no code and no check engine light on.

Yes, the engine needed service, but the heart of the poor operation was a very dirty MAF sensor due to an oil soaked K & N oil filter.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2014

You broke it!

Posted on by

Automotive repairs can cause high tensions with a vehicle owner.

In a perfect world, everything is free and nothing ever goes wrong… Every day I work with clients that understand that the vehicle they own will need service and repairs. The owner knows that a quality repair will cost something.

Finding good prices and honest service is the clients #1 objective.

I never force a client to do a repair with me. I give the client an estimate for the repairs needed and the client can say yes or no. Once the repairs are finished. I drive the vehicle and make sure the repairs are done correctly.

The goal is to fix it right the first time. When I return the vehicle back to the client, I know everything related to the repairs is working correctly.

It never did that before you worked on it! You broke it!

When a client says, it never did that before you worked on it.

I ask the client to stop in and show me what is going on. I will look at the clients issue, and find out how it may be related to the repairs preformed on the last visit.

99% of the time, the clients issue is not related to the last repair, it’s a new repair.

Sabotage or coincidence?

Some times things happen we can’t control. So I work hard to make sure all new issues are addressed one at a time and quickly. When I work on your vehicle, your car is in the shop because it’s broken or needs service. If something goes wrong while your car is in my care, I will openly tell you. I have no reason to hide an oops. Some times things just happen and we move on.

Case in point, Sam’s car was in for an oil service and 4 new tires. During the service work I found a left, low beam head lamp was not working and the upper radiator hose was leaking coolant.

The bulb was old and had burnt out and the hose was 10 years old and ready to be replaced. I asked Sam if he would like to replace both of the head lamps together and take care of the leaky hose. Sam said NO to both repairs. A week later Sam was back saying, I must have done something to the other head lamp, because now it does not work. Sam was angry and wanted me to give him both bulbs for free and put them in for free.

I said to Sam. Do you remember our talk about how light bulbs age and the other bulb could need replacement very soon? Plus, I asked you if you would like to replace both bulbs during your last visit, and you said NO!

Sam had zero recall about what we talked about, even though it was on Sam’s last repair order. Sam was very upset because I would not give him the bulbs for free.

I offered to install the bulbs at no labor charge, but Sam would have to pay for the bulbs.

It was not my fault that the bulbs had burnt out, but because I was the last person to work on the car it was my fault the other bulb stopped working.

Sam stormed off angry.

5 weeks later Sam’s car was back at the shop for the coolant leak repair and 2 head lamp bulbs. Sam said he over reacted to the bulb issue, and trusted our work.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2014

 

Should I fix my old car or buy a new one?

Posted on by

A New car = higher costs; tags, tax, licence, payments, and insurance.

All of the above costs will be part of a buying new car. When a client says they will just go and buy a new car, I ask why?

90% of the time it is more economical to fix the car you own.

A repair of $600.00 is nothing compared to making $500.00 payments every month, just to have a new car smell. Fixing your old car may seem like it costs a lot, but if the car still looks good inside and out, fix it!

Just last week I did a $4,300 repair on an “all original 1990 300zx” with 73,000 miles on it. The 300zx was very well-kept, and the client was attached to the car. The repair costs may seem high, but the client really likes the car, so to him it was worth it to fix it right.

Most cars from 3 years to 8 years of age will need an average of $800.00 a year in overall preventative maintenance repairs. Tires, Brakes, Oil changes, Radiators, Belts and Hoses are the basic needs of any car or truck.

A/C, Suspension, Engine and Transmission repairs are less common types of repairs, but will happen some day. Over time the repair costs will average out. One year you may only spend $300.00 on basic services and the next year you may need to repair the brakes and replace the tires at $1400.00.

Consumer Reports is a great place to find out about repair costs for the new car you may want to buy. Keep in mind that this is for new cars.

For used cars, over 75,000 miles I use a vehicle service formula. You may know about how many miles you drive in a year. Use the formula to see if you are above or below the national average for service and repair costs.

Heavy trucks 1 to 1.5 ton; Mileage x .18 cents per mile driven = basic repair costs

Full size cars and 3/4 ton trucks and vans; Mileage x .12 cents per mile driven = basic repair costs

Compact cars, light trucks and mini vans; Mileage x .10 cents per mile driven = basic repair costs

This is just a basic service and repairs list, a guide to calculate average service and repair costs. Costs will adjust up for heavy use or towing, but if you baby your car, the costs would adjust down. For basic service work, use my spare change in a jug method. Again the list above is only a guide.

Buying a used car is an option, but always take it to a shop to be inspected!

Yes, buying a used car is an option, but always take it to a shop to be inspected before you buy it.

Even if you think you know it all. I will assure you, you don’t.

Unless you work on cars and trucks all the time you will miss something that can cost you big money to fix later. If you are out looking at cars, you can go to any AAA approved repair shop to get a used car inspected.

A clean CarFax report does not indicate that the car is good to go. CarFax is only a good guide if the damage and repairs got reported to CarFax.

So just because it has a clean CarFax does not indicate it’s an accident free vehicle.

If your car is still in good, overall condition, fix it! In the long run, it will save you money.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013

 

A Worn Tie Rod, What does one looks like?

Posted on by

Corey M. asked what does a worn out tie rod look like?

Well, I have a short video clip of a worn out inner tie rod from a Nissan Pathfinder.

The tie rod in the video clip is from a Nissan Pathfinder. It was very worn. It was causing thump and clunk noises. Plus it was causing tire wear. Tie rods are simple to change. I tell clients to change worn tie rods before they can cause bigger problems.

A torn open dust boot will allow road grime to enter the tie rod joint and cause heavy wear quickly.

Inner tie rods on a rack and pinion steering gear will normally last the life of the steering gear. If tie rods go bad, they can be replaced without replacing the steering gear. As long as the steering gear is not leaking.

Thank you for the e-mail question Corey.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013

Ms. Kate

Posted on by

Ms. Kate asked; why can’t you guarantee the repair will fix my car?

Ms. Kate has an almost broken car. Some failures and repairs will fall into a gray area, and Ms. Kate’s Ford was just that, a gray area repair.

The car would stall out when coming to a stop, but restart. Plus it would sometimes not start when hot. It would start after it cooled down for about 1 hour. The condition is intermittent, and it has never acted up for us in the shop. Plus the car’s computer had no codes.

The client never had time to leave the car for a full day.

Ms. Kate does not trust the car and fears driving it because it could stall at the wrong time.

After testing the car a couple of times, my best guess was it could be one of three things. #1 it could be a faulty crank shaft sensor. #2 it could be a faulty fuel pump. #3 it could be a wire fault related to a poor connection at a wire connector or wire junction. More testing was needed.

The big issue for the client is she is on a tight budget and can only spend what is needed to do the needed repair. I understand this all to well. I have a budget and have to stick to it.

To help the client, I advised her to let me have the car for a couple of days so I could leave my test gear hooked up and drive the car at random times. Ms. Kate did not like being without her car, but it needed to be done.

What I found; it did have a faulty crank shaft sensor and a bad fuel pump. The crank sensor was related to the stalling condition and the fuel pump was related to the random hot no start.

I always like to test the car and confirm the fault area. Guessing about what repairs are needed can lead to wasted money and time.

Some times a best guess is all we have, but it must be a good solid guess, 80% chance or more. Give me some time with your car and we can find the fault part 100% confirmed!

I want all my clients to feel good about the money they spend. I want 100% of your business, and I want you to be happy that you used Tony’s Service Center for your repair needs. Ms. Kate is happy because we fixed the cars issues. It did take three days to get it to act up, but only 4 hours to make the repairs once we knew what was broken.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013

For Sale

Posted on by

Yep! It’s For Sale.   ****One owner, driven only on Sunday’s!****

So you are looking for a new car. Maybe not brand new, but new to you. Surfing the web to find a car, can be frustrating.

You may find one you like, but when you go see it in person things change.

I recommend to every client, if you are going to buy a used car. Bring it into the shop for us to check it out. A full car inspection is a small drop in the bucket and it can keep you from getting into a money pit.

Some cars are not worth it, they will suck the money from your budget, and leave you disappointed. The car you choose needs to fit into your budget not eat it alive.

50 to 60% of the cars and trucks that visit the shop for a pre-purchase inspection are only in fair condition. Not worth your time or money

The seller is getting rid of a problem child.

I find a diamond in the rough from time to time, but for the most part many cars I inspect are worn out.

Buying the right car takes a little time. I find that many clients will look at more than 10 cars before they find a keeper.

Cars and trucks from an auction house can be a high risk, so beware that repairs could cost you big if you get a lemon.

So here are 5 basic steps to help you look for your new car.

Step 1: Go look at cars during the day.

Cars on the car lot will look real nice under the bright lights, but you will miss many details at night. During the day it is easy to see all the flaws. Paint color issues and poorly done body repairs are the big defects that hide at night.

Take a flashlight. You need to look behind and under the seats, in the trunk and under the dash. You are looking for anything that looks broken or in need of repair.

Step 2: Buy 2 to 4 years old, let the first owner take the hit.

When you buy a gently used 2 to 4-year-old car, the first owner will take the hit on the deprecation of the car. Almost all cars and trucks take a huge dip in value in the first 5 years. It is best to buy a car no older than 8 years. This way you will still have service parts available to keep your car looking and running good.

Auto manufactures start to drop cosmetic parts at 8 years of age. Cosmetic parts keep your car looking good. If it is in an accident it will need cosmetic parts to put it back together. So It is best to get something newer vs real old.

Mechanical parts will still be available for many years and you may have to go to a regular auto parts source (NAPA) for some things as the car ages past 15 years. Personally I drive a 1993 Toyota Tercel and my Toyota is 20 years old, but Toyota still services almost 80% of the parts for this car.

As long as you love your car and we can get quality parts for it, we can keep your car running great.

Gear head alert: If you have mechanical skills, the year of the car will never matter, but I will still recommend you to have an independent shop inspect the car, because it will be an objective opinion. If I save you money and keep you from buying a money pit, it will be worth every penny for the inspection.

Step 3: Drive the car in the city and on the freeway.

Before you bring the car in for an inspection. You can rule out some things on your own. When you drive the car, does it drive straight down the road? On flat ground, under safe conditions, lightly grip the steering wheel while driving. If the car wants to turn or pull to one side, it could indicate repairs needed. Tires can also cause a pull, but so can worn suspension parts or poor quality accident repairs.

Do the same pull check when using the brakes, does it pull or shake? Take time to listen to the car not the radio. Is the car overly noisy when driving on a smooth road? Does it vibrate at an idle when it is in gear? Does it shake at high speeds above the speed limit…

Does the car smell musty or like an old gym bag when you first get in. This is mostly noticed when you live in a hot climate area like Phoenix, AZ.

Do all the electric devices work? Does the A/C and heat work correctly. This one is a must have in Phoenix, AZ

Just check everything you can, switch everything on and off plus open and close all windows and the sun roof if it has one. If it will pass basic tests you are ready for the next part of the inspection.

Then bring the car into the shop for a full inspection. We will check the engine, fuel and Ignition systems, scan the computer, emissions equipment, transmission and under chassis. We will look for hidden body repairs that may have not been reported to Carfax. If we find issues we can give you retail prices on the needed repairs. This repair list will give you power to wheel and deal with the seller or just pass on the car.

Step 4: Stay away from cars that have “Go Fast” modifications.

Modifications do not add to the retail value or private re-sale value of the car, unless done correctly. Too many times I see cars that are just hacked up, but they look good on the outside. You can break this rule if you want to, but let me tell you why this step is important.

Let’s say you buy a Ford Mustang with a smaller V8 or V6, but later will want to add performance parts to it to make it Go Fast. You just killed the re-sale value of the car and wasted your money for a small gain.

It would be better for you to just buy the Mustang GT. The GT will hold its value because it is not hacked up, plus it is a Go Fast car to start with. Buy right, buy once.

When performance parts go bad, finding replacement parts when traveling can cause issues. A near stock car can be serviced at almost any repair location. Modifications will cost extra to maintain, and may add extra repair labor when servicing your car.

Every change you make to the car has a price. The costs go way past the original installation the parts.

Step 5: The most important step is…

*** “Do not buy any car or truck without getting it inspected!” ***

Ok, this should be a no brainer, but it’s not. I have looked at many cars that clients have already signed the papers on and they own the car.

I act on the clients behalf to protect the client from the seller. Think of it as being your second set of eyes. About 99% of all used cars older than 5 years do not come with a warranty. Yes, you can spend extra money on a 3rd party warranty, but if you buy a good car, you will not need to worry about a warranty because you did your home work. So do not sign anything till you have had it checked out at an independent shop. Even if the car is from a friend!

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013

 

Man Made

Posted on by

A Man Made failure can be very hard to find. I get two or three a year that make me pull my hair out. Most of the time I know something is rotten, because it looks like some one has man handled the area in question.

A man-made failure is still a failure, but a man-made failure will cause many more issues during the diagnosis.

Someone caused the failure, it did not happen on its own.

What did they do or not do right…

Man made failures are not a normal condition related to age or heat. A man-made failure is caused by an owner doing DIY repairs or a junior mechanic working on the car the wrong way.

The part pictured above is from a Nissan. The Nissan was at a car wash for an engine detail and two days later it would not run correctly and set a lean code (P0171). Yes, the check engine light came on.

Issues after an engine detail are very common.

I have many car owners that have skills, and they bring the car to me when the job is outside what they can do. I am Ok with that. Doing your own repairs is fine, just do not bring it to me in a basket and expect it to be cheep to put back together.

The image above and just below are from a 6.0 V8 Chevy engine. The two Chevrolet knock sensors, live in a well under the intake manifold. The ash look on the sensors is due to an engine detail. The hot water under high pressure went into the well area and worked its way into the sensor. Boo Hoo, it set a code and it was only four days after the engine detail.

If your car is 8 years old or older, I would not recommend to do any high pressure washing around the engine and engine harness. The damage high pressure water will do, can cost you more trouble than its worth. I wash my engine bays with hot low pressure soap & water. Then I blow dry everything before re-starting the engine.

Car owners can cause more issues than a junior tech, because they just do not know any better. The next image below is just that case. The owner installed a fancy gauge kit on his Toyota Supra and then odd things started to happen about a month later.

Clients lie, yes I said it, they lie. It is just like a little kid getting in trouble, they did something that caused a problem, and now they need a bail out, but they do not want to admit they did it.

The normal story I hear often is a friend installed it for me or I had a shop install it and now it does not work.

With more Q&A you find out that they never had a friend or shop install it. Go figure.

I have worked with many junior technicians and every one of them had questions. I like it when they ask before they jump right into the fire. The image above is from a man-made failure that an 8 year tech made.

I worked with him for 4 months and never questioned his work. One day I had a Toyota Camry pop in that had an odd issue. It was running rich and had an odd flutter upon acceleration. I had never seen anything like this before.

After 2 hours of tests I had my answer. I did not like what I found. The cam shaft gear was touching the signal wire to the #1 injector. It was causing extra injection pulses, causing the rich fuel mixture and engine flutter.

The tech had just replaced the valve cover gasket the week before.

When I showed the tech the findings, he had a I don’t care response. When I asked him why he felt this way, he said, look at the car, it’s a P.O.S.

The tech quit that Friday.

It does not matter how old a car is or the condition the car is in. Every repair needs to have the same quality. Service above self. Doing your best every time not just some of the time.

P.O.S. defined:  pile of shit

 

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013

 

P0171 & P0173

Posted on by

Engine codes P0171 and P0173, a lean fuel system condition, the engine may miss fire or feel lazy. Modern cars and trucks have many sensors that send information to the engine computer. The engine computer looks at the information coming in from all the input sensors and then it makes changes to the, transmission operation, ignition timing and fuel injector delivery. The computer does this very fast, so fast most drivers will never feel the changes taking place.

The computer adjusts many outputs at the same time, every second.

The PCV hose pictured above, is for a 2009 Ford truck. The old hose went bad and caused two codes in the engine computer. P0171 and P0173 are codes for a lean condition inside the engine. The hose below failed, causing the codes to set in the engine computer.

When the C.E.L. (check engine light) comes on, it makes you wonder, is it critical or a minor issue. Plus now you have something new to fit into your budget, Great!

As long as your check engine light is not flashing at you, you can still drive your car, but should get it in for service as soon as possible. The light is on for a reason.

A lean condition can cause many issues. Fuel economy will become poor and the engine may even stall when coming to a stop. It will run rough when cold and lack power when warm. It needs attention, your ride is unhappy, and it’s time to make a repair.

Hose failure is the most common cause of a lean fuel system. Many parts on the engine can cause a lean code issue, so you should have a ASE certified shop look at your engine light issue. Free code checks at the auto parts store will not be 100%.

I use dealer parts often. In this case, the PCV hose has been updated. When ever I have a chance to make a repair that will solve more than one issue I do it. The hose was updated to prevent PCV carbon build up and the rubber hose joints are made thicker. The part was less than $30.00. An investment vs just using a regular chunk of hose, but it will last. At Tony’s service center every repair we do comes with a 2 year 24,000 mile warranty.

Stop in for a visit today.

It’s all good under the hood. Anthony Xavier ASE Master Technician

copyright: All rights reserved @ HeyAnthonyAZ.com 2013